Regency Certified Fireplace Dealer Serving Burnaby
Gas fireplace inserts installed across Burnaby in the late 1990s and 2000s are reaching 20 to 25 years old, and many are now costing more in repairs than they are worth. A modern replacement insert delivers a cleaner flame, higher efficiency, better heat output, and updated safety controls while fitting the same opening. Eaton's Heating installs gas fireplaces across Burnaby from our Coquitlam base, directly on the Burnaby border. We are a Regency certified dealer and install options from Regency and Napoleon in traditional, contemporary linear, and panoramic styles. Every project starts with a free in-home assessment and written estimate. Flexible financing through Financeit with zero percent interest over 12 months.
See what our customers have to say
Brands Serviced
Years of Experience
Homes Served and Counting
Burnaby's older neighborhoods are home to thousands of gas fireplace inserts that were installed during the renovation wave of the late 1990s and early 2000s. In Capitol Hill, Burnaby Heights, and South Slope, these units provided years of reliable supplemental heat and ambiance, but they are now reaching the age where major components fail in sequence: thermocouples wear out, then the pilot assembly clogs, then the gas valve stiffens, and eventually the cost of keeping the unit running exceeds what it is worth. At that point, a modern replacement insert that fits the same opening and connects to the existing gas line and venting is the better investment. The new unit delivers a more realistic flame, higher efficiency, updated safety controls, and a manufacturer warranty that an aging unit no longer carries. Our in-home assessment evaluates the existing opening, gas line, and venting path to confirm compatibility and presents options with clear, all-inclusive pricing.
For homeowners adding a gas fireplace to a room that has never had one, whether as part of a renovation in Deer Lake, a basement finishing project in Edmonds, or a living room upgrade in Buckingham Heights, a direct-vent gas fireplace installs into a framed wall with horizontal venting through the exterior. These sealed-combustion units draw combustion air from outside and exhaust directly outdoors, requiring no chimney. The installation involves framing the fireplace enclosure, running a gas line to the location, installing the coaxial vent through the exterior wall, and connecting electrical for fans and ignition controls. In Burnaby's condo and townhome market around Metrotown and Brentwood, we also replace builder-grade direct-vent fireplaces with upgraded units that produce better flame appearance, higher BTU output, or a more contemporary aesthetic. Strata buildings require coordination with property management for exterior access and any building-specific requirements, which we handle as part of the project.
Eaton's Heating is a Regency certified fireplace dealer with access to Regency's full residential gas fireplace and insert lineup. We also install Napoleon's residential series spanning traditional log-set inserts, contemporary linear fireplaces, and wide panoramic viewing models. For homeowners who want to upgrade an existing gas firebox without replacing the entire unit, we install 18-inch and 24-inch gas log sets that refresh the flame appearance and provide supplemental heat with minimal installation scope. Rather than pushing one product for every home, we match the unit to the room size, venting path, aesthetic preference, and heating needs. We are a FortisBC Trade Ally, BBB A+ rated, and Technical Safety BC licensed under LGA0200006 with over two decades of gas fireplace installation experience. Our 400+ five-star Google reviews and 4.9 average rating come from installations that are properly sized, properly vented, and safety-tested before we leave.
Every gas fireplace installation includes a Technical Safety BC gas permit, full combustion and gas leak testing, safety control verification, remote or thermostat setup, and a walkthrough of fireplace operation. We handle all permits and inspection scheduling as part of the project. For Burnaby homeowners whose existing gas fireplace needs repair rather than replacement, we provide honest guidance on which path makes more financial sense. We also install furnaces, heat pumps, and all other HVAC systems across Burnaby.
Gas fireplace projects in Burnaby vary by building type and what already exists. A Willingdon Heights homeowner with a 20-year-old gas insert that keeps needing repairs is looking at a straightforward replacement with a modern unit in the same opening. A Sperling-Duthie family adding a feature fireplace to their main living area during a renovation needs a direct-vent unit framed into the wall with a new gas line and exterior venting. A Highgate condo owner upgrading a basic builder-grade fireplace to a contemporary linear model needs a unit that fits the existing rough-in dimensions and venting path. We evaluate each situation during the free assessment and present options with clear pricing for every configuration.
For information on FortisBC incentive programs that may apply to high-efficiency gas fireplace installations, visit our rebates page. For all HVAC services across Burnaby, Eaton's Heating covers every category.
Licensed Gas Contractor (LGA0200006)
Authorized Dealer and Installer
Certified Fireplace Dealer
Have a question about your HVAC system? Book an appointment using the form below, or call (604) 535-8434 for immediate help.
Gas fireplace installation in Burnaby typically ranges from $3,500 to $8,000 depending on the unit, the complexity of the gas line and venting run, and any framing or finishing work required. Replacing an existing gas insert with a new one in the same opening is toward the lower end. New installations into walls that require framing, gas line runs, and exterior venting cost more. Gas log set installations in an existing firebox are the most affordable option, typically well under $3,500. We provide free written estimates with every cost itemized.
If the fireplace has needed multiple repairs in the past two years, uses parts that are discontinued or difficult to source, or has a cracked firebox or severely corroded burner system, replacement usually makes more financial sense. A modern gas insert delivers better flame appearance, higher efficiency, and updated safety controls. The general rule: if the next repair costs more than a third of what a new unit would cost installed, replacement is worth serious consideration. We present both options with transparent pricing during the assessment.
A gas insert is a complete sealed-combustion appliance with its own firebox, glass front, venting system, and controls. It operates as an independent heating appliance and delivers meaningful supplemental heat. A gas log set is a simpler upgrade: ceramic logs and a burner assembly placed inside an existing open firebox. Log sets provide flame appearance and some heat but are not sealed-combustion units. Inserts are more efficient and produce more heat; log sets are simpler to install and less expensive.
A gas fireplace provides supplemental heat, not whole-home heating. Most residential gas fireplace inserts produce 20,000 to 40,000 BTU, which is enough to meaningfully warm the room they are installed in and adjacent open spaces. In Burnaby's moderate coastal climate, a gas fireplace in the main living area can reduce the load on the furnace or boiler during mild to moderate cold, lowering gas bills. During the coldest stretches when overnight temperatures drop below zero, the primary heating system does the heavy lifting while the fireplace provides comfort in the room where the household spends the most time.
Yes. Every gas fireplace installation requires a Technical Safety BC gas permit and inspection. We secure the permit and schedule the inspection as part of every project. Permit costs are included in the written estimate so there are no separate charges. The inspection verifies that the gas line, venting, and appliance installation meet current safety code before the fireplace is cleared for regular use.
In many cases, yes. A traditional gas insert with ceramic logs can often be replaced with a contemporary linear model or a panoramic viewing unit, though the new unit needs to be compatible with the existing opening dimensions and venting configuration. Some style changes require modifications to the framing, surround, or venting path. We assess compatibility during the free in-home estimate and let you know exactly what is involved before quoting a price.
Simply complete our form to make an appointment. A member of our team will be in touch to confirm your appointment.
