CleanBC Rebate-Eligible Heat Pump Installations in Burnaby
Adding a central heat pump to a Burnaby home that already has a gas furnace and ductwork is the most practical path to year-round heating and cooling from a single system. The heat pump connects to your existing duct system and runs as the primary heating and cooling source for most of the year, switching to the gas furnace only during the coldest stretches. For homeowners without air conditioning, this means gaining cooling capacity for Burnaby's increasingly warm summers without installing a separate system. Eaton's Heating installs central ducted heat pumps across Burnaby from our Coquitlam base, directly on the city border. We are an authorized Trane dealer and FortisBC Trade Ally. CleanBC and FortisBC rebates can significantly offset the upfront cost. Free written estimates and flexible financing through Financeit with zero percent interest over 12 months.
See what our customers have to say
Brands Serviced
Years of Experience
Homes Served and Counting
The first question for any Burnaby heat pump installation is whether the home has ductwork. Central ducted heat pumps connect to existing supply and return ducts, which means homes with a gas furnace and duct system are ready for a heat pump addition with relatively minimal disruption. This covers a large portion of Burnaby's housing stock: the 1960s to 1980s ranchers and split-levels in Capitol Hill, Sperling-Duthie, and Deer Lake, the 1990s and 2000s homes in South Slope and Buckingham Heights, and the family homes along the Edmonds and Highgate corridors. We evaluate ductwork presence and condition during every free assessment and are upfront about what is and is not feasible for your home. For older homes in Burnaby Heights and Willingdon Heights that were built with boiler systems and have no ductwork, we also offer ductless mini-split heat pump installations that provide heating and cooling to individual rooms or zones without any duct runs.
For Burnaby homes with existing ductwork, the most common installation is a hybrid dual-fuel setup. The heat pump handles heating and cooling for roughly 90 percent of the year. When outdoor temperatures drop below the system's efficient operating range, typically around minus 5 to minus 10 degrees Celsius depending on the equipment, the controls automatically switch to the gas furnace for backup heating. The homeowner does not need to do anything; the switchover is seamless. This approach makes particular sense in Burnaby because winter temperatures at lower elevations around Metrotown and Edmonds rarely require the furnace backup, while homes at higher elevations near Burnaby Mountain and the SFU corridor see colder nights that justify keeping the gas furnace in the system. Either way, the homeowner gains air conditioning for summer without a separate outdoor unit, and the heat pump runs as the primary heating source for most of the heating season at significantly lower operating cost than gas alone.
Eaton's Heating is the only authorized Trane dealer in Coquitlam, and we install Trane's full central heat pump lineup across Burnaby. Trane's variable-speed heat pumps deliver the highest efficiency and quietest operation, adjusting output continuously to match the exact heating or cooling demand. Their mid-range and standard-efficiency options provide proven Trane engineering at lower price points for homeowners who want reliability without the variable-speed premium. We also install KeepRite and RunTru heat pumps for budget-conscious projects that still need solid performance. Every heat pump is paired with a matched indoor coil sized to the outdoor unit for peak efficiency. We are a FortisBC Trade Ally, BBB A+ rated, and Technical Safety BC licensed under LGA0200006 with over two decades of heat pump installation experience. Our 400+ five-star Google reviews and 4.9 average rating come from properly sized, properly commissioned systems that deliver the performance the homeowner was promised.
On installation day, we set the outdoor unit on a proper base with adequate clearance for airflow and service access, run the refrigerant line set and electrical connections, install the matched indoor coil in the furnace plenum, configure condensate drainage, and integrate the heat pump controls with the existing furnace for automatic dual-fuel switching. We charge the system to manufacturer specifications, configure defrost settings for Burnaby's damp coastal climate, register factory warranties, and walk you through operation including the balance point temperature where the system switches between heat pump and furnace modes. Most installations are completed in one to two days. If your existing heat pump needs repair rather than replacement, we provide honest guidance on which option makes more financial sense. We also install furnaces and boilers across Burnaby for homes where a different heating approach makes more sense.
Heat pump installations in Burnaby vary by home age, electrical infrastructure, and ductwork condition. Capitol Hill and Parkcrest homes from the 1960s with forced-air systems often need an electrical panel upgrade to support the heat pump's dedicated circuit, and the existing ductwork may need sealing or modification to handle the heat pump's airflow characteristics. Newer homes in Sullivan Heights and Lougheed Town Centre typically have modern panels and ductwork already suited to heat pump integration. Brentwood and Metrotown condos with existing central systems can sometimes accommodate a heat pump swap, but strata approval and electrical capacity in the building need to be verified first. We include all of these evaluations in the free assessment and build any required upgrades into the written estimate so there are no surprise costs.
CleanBC and FortisBC rebate programs offer significant incentives on qualifying heat pump installations, and as a FortisBC Trade Ally, Eaton's Heating handles the application paperwork. Visit our rebates page for the latest active programs. For all HVAC services across Burnaby, Eaton's Heating covers every category.
Licensed Gas Contractor (LGA0200006)
Authorized Dealer and Installer
Certified Fireplace Dealer
Have a question about your HVAC system? Book an appointment using the form below, or call (604) 535-8434 for immediate help.
Central ducted heat pump installation in Burnaby typically ranges from $7,000 to $12,000 before rebates, depending on the equipment tier, whether it is a new addition or a replacement, and whether electrical panel or ductwork upgrades are needed. CleanBC and FortisBC rebates can offset a substantial portion of this cost on qualifying installations. We provide free written estimates that itemize all costs and outline applicable rebates so you see the net price before deciding. Flexible financing through Financeit with zero percent interest over 12 months.
Yes. We install ductless mini-split heat pumps for homes without existing duct systems. An outdoor compressor connects to wall-mounted indoor units through a small line set that passes through the exterior wall, providing heating and cooling without duct runs. This is a practical option for older Burnaby homes heated by boilers where retrofitting ductwork would be disruptive and costly. We assess your layout and recommend the right configuration during the free in-home estimate.
A hybrid dual-fuel system pairs a central heat pump with an existing gas furnace. The heat pump serves as the primary heating and cooling source, and the furnace provides gas backup when outdoor temperatures drop below the system's efficient operating range. The switchover is automatic based on a balance point temperature programmed into the thermostat. For most Burnaby homes at lower elevations, the heat pump handles heating for the vast majority of the winter. Homes at higher elevations near Burnaby Mountain may rely on the furnace backup more frequently during the coldest weeks. The main advantage is gaining cooling capacity for summer while reducing gas consumption for heating, all from a single outdoor unit.
Yes. Burnaby's mild coastal winters, with average highs around 3 to 6 degrees Celsius from December through February, keep temperatures well within the efficient operating range of modern heat pumps for the majority of the heating season. Modern cold-climate heat pumps continue producing heat effectively down to minus 15 to minus 25 degrees Celsius, well below anything Burnaby experiences. The main consideration is Burnaby's persistent winter dampness, which triggers more frequent defrost cycles on the outdoor coil. Proper defrost configuration during installation ensures the system handles this without performance issues.
Yes to both. We secure all required electrical and gas permits and coordinate inspections as part of every installation. Permit costs are included in the written estimate. On the rebate side, CleanBC and FortisBC offer significant incentives on qualifying heat pump installations. As a FortisBC Trade Ally, we track active programs and handle the application process. We outline applicable rebates in your estimate so you see the net cost before making a decision.
Many older Burnaby homes, particularly those built before the 1980s in Capitol Hill, Burnaby Heights, and Sperling-Duthie, have 100-amp electrical panels that may not have capacity for a heat pump's dedicated circuit. A panel upgrade to 200 amps is sometimes required. Newer homes in South Slope, Buckingham Heights, and Sullivan Heights typically have 200-amp panels with room for the additional circuit. We assess panel capacity during the free in-home assessment and include any upgrade costs in the written estimate. All electrical work is completed by a certified electrician.
Simply complete our form to make an appointment. A member of our team will be in touch to confirm your appointment.
